The Carbon Border Adjustment Mechanism (CBAM) has moved from a reporting exercise to a financial one. As of 1 January 2026, the definitive regime is in force: importers into the EU must surrender CBAM certificates for the embedded emissions in covered goods, and they will rely heavily on data supplied by their non-EU producers. The first annual declaration under the definitive regime falls due in 2027, and the first verification cycle will scrutinise 2026 imports. That makes the coming months the decisive window for exporters to check, correct and document their emissions data.
This article sets out what exporters should verify before verification begins, in plain terms, with practical cautions.
Why 2026 data matters more than earlier reporting
During the transitional period (2023–2025), reporting was largely about learning: default values were allowed, and penalties for incomplete data were limited. Under the definitive regime, the economics change. The number of certificates an importer must buy depends directly on the emissions figure attached to your goods. If your data is inflated, your customer pays more and may look for other suppliers. If your data is understated and later challenged, your customer faces a correction, a higher bill and possible penalties — and you risk losing the relationship.
Verification is the gate. Accredited verifiers will check the emissions declaration against your underlying records. Data that cannot be traced to source documents, or that was estimated without a documented method, is likely to be rejected or adjusted. In practice, a rejected figure often means the importer must fall back on default values, which are typically conservative and higher than actual emissions.
Start with the basics: goods, CN codes and scope
Before examining a single meter reading, confirm what is actually covered.
Product scope. Check each product against the current list of covered goods and their CN codes. Aluminium, cement, fertilisers, iron and steel, hydrogen and electricity remain the core categories, but the detailed product lists and downstream extensions have evolved. A wrong CN code can mean reporting under the wrong rules or missing an obligation entirely.
Installation boundaries. Verify that the production installation you report is correctly defined and that all relevant production routes and processes are included. Multi-product sites need clear allocation of emissions between covered and non-covered outputs.
Changes during 2026. If you changed a production line, fuel, supplier or process during the year, the data must reflect it. Verifiers look for consistency between the reported annual figure and the actual operating history.
Check the emissions methodology against the current rules
The implementing rules for the definitive period set out how embedded emissions are calculated, including system boundaries, the treatment of precursors, and the use of actual versus default values. Exporters should verify:
1. That the calculation follows the current methodology, not a template kept from the transitional period. Some default assumptions and reporting fields have changed.
2. That direct and indirect emissions are correctly separated where the rules require it, and that indirect emissions are included for the goods and sectors where they apply.
3. That precursor materials — such as intermediate steel, alumina or ammonia — carry their own verified or documented emissions, rather than being treated as zero or estimated loosely.
4. That electricity consumption and its emission factor are documented, especially where grid factors or power purchase arrangements are used.
5. That any use of default values is explicitly justified and limited to the situations the rules permit.
A simple test: could an independent engineer reproduce your reported figure from your written method and your records? If not, tighten the method before the verifier arrives.
Make your evidence trail audit-ready
Verification is an evidence exercise. The most common causes of adjustment are not calculation errors but missing or inconsistent records. Before verification, assemble:
Meter logs, utility bills and fuel purchase records for the full reporting year;
Production records showing output quantities by product and by production route;
Laboratory analyses for fuel and material composition, with sampling dates;
Invoices and transport documents for precursors and input materials;
The written monitoring methodology, including any changes made during the year and why;
Internal review notes showing who checked the figures and when.
Ensure that totals in the emissions report reconcile with production and procurement records. Gaps in a month of meter data, or a fuel bill that does not match reported consumption, invite the verifier to substitute conservative estimates.
Coordinate early with your importer and the verifier
Verification is commissioned by the importer, but it depends on your cooperation. Practical steps:
Agree the data package and timeline early. Ask your importer which verifier has been engaged and what format and level of detail is expected.
Clarify who holds which records. If several suppliers feed one installation, or if tolling arrangements apply, confirm in writing who reports what.
Prepare for site visits or remote checks. Verifiers may request access to installations, interview staff, or ask for sample-based testing. Nominate a knowledgeable contact who can answer questions on the method and the records.
Keep a single version of the truth. Circulate one controlled version of the emissions report and supporting file; conflicting versions create suspicion and delay.
Cautions and common pitfalls
Do not treat last year's template as sufficient. Methodology updates and new data fields are common; check the current official guidance each cycle.
Do not let commercial pressure drive the number. Understating emissions to win orders creates correction risk for your customer and reputational risk for you.
Do not rely on verbal explanations. If a figure depends on an assumption, write it down and keep the supporting evidence.
Watch currency and unit conversions. Unit errors between tonnes, kWh and emission factors are a frequent source of discrepancies.
Plan for the certificate price. Even accurate data carries a cost; importers may seek price adjustments or contract terms linked to verified emissions. Early transparency helps both sides plan.
Keep records beyond the reporting year. Verifiers and authorities may ask for evidence covering prior periods, and disputes can arise after the declaration is filed.
A realistic timeline
Work backwards from the 2027 declaration. Data collection and internal review should be complete well before the verifier is engaged; verification itself takes time, and corrections may require re-checking source records. Exporters who begin in the final weeks often find that missing documents cannot be reconstructed, and fall back on conservative defaults.
The core message is simple: the 2027 verification will test the quality of your 2026 data, not your intentions. Exporters who confirm scope, follow the current methodology, and build a traceable evidence file now will protect their commercial relationships and avoid costly adjustments later.
This article is for reference only; please rely on the relevant official data.*